Accu-Chek NANO Manual do Utilizador descarregar pdf (Página 30)

Control Tests

Touch the drop to the

front edge of the yellow

window of the test strip

until you see flash.

Do not put control

solution on top of the

test strip.

Remove the cap from the

control solution bottle.

Wipe the tip of the bottle

with a tissue.

Squeeze the bottle until a

tiny drop forms at the tip.

Insert the test strip into

the meter in the direction

of the arrows.

Place the meter on a ﬂat

surface.

Check the useby date

on the test strip

container. Do not use

test strips past the

useby date.

Performing a Control Test

You need the meter with pre-inserted activation chip, a test strip, and control solution Level1, Level2, or

both. The control level is printed on the bottle label.

Select the control

solution to test. You will

enter the level later in

the test.

When you see ﬂash,

there is enough control

solution in the test strip.

Wipe the tip of the bottle

with a tissue. Cap the

bottle tightly.

51689_05958458003_CA_EN.indb 28 9/3/13 4:10 PM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Sem comentários

Accu-Chek NANO Manual do Utilizador Página 30