Accu-Chek Softclix Manual do Utilizador descarregar pdf (Página 21)

Settings

You must adjust the year, time and date to enable the meter to correctly

allocate test results to a particular day or time.

You have the option of setting the alarm clock function and hypo warn-

ing, but are not required to.

The procedure for changing the settings is as follows:

 Press the S button to call up the settings menu. A test strip is not

advanced.

When a setting flashes in the display, it indicates that you can

change it.

 Press the M button to change the current setting.

 Numerals such as the year, time and date can be incremented

to a certain value, then the count-up starts again from the be-

ginning.

 In the case of settings that give you a choice of options, e.g. the

beep tone setting, pressing the M button presents each option in

turn.

 Press the S button to save the chosen setting and move on to the

next setting.

 You can change the settings at any time. Press the S button repeat-

edly until the setting you wish to change is displayed flashing. A test

strip is not advanced.

You can close the settings menu at any time by pressing the Test button.

All settings you have entered up to that point are saved.

Always turn the meter on with the S button when you intend to

change the settings.

If you turn the meter on with the Test button and there is a drum

in the meter, a test strip will be advanced.

The meter turns off automatically after approximately 60 seconds

if you do not press a button. All settings you have confirmed up to

that point with the S button are retained. Settings that you have

not confirmed with the S button are lost and the original setting

remains.

The year, time and date settings are lost when you change the

batteries if

 you take longer than two minutes to do so,

 you press a button while no batteries are inserted,

 you open the drum compartment while no batteries are

inserted.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 81 82

Sem comentários

Accu-Chek Softclix Manual do Utilizador Página 21