Accu-Chek Softclix Manual do Utilizador descarregar pdf (Página 29)

Settings

The Time 2 setting is followed by the Time 3 setting.

 If you wish to set Time 3, proceed as described for Time 1.

The setting for Time 3 is followed by the hypo warning setting.

 If you do not wish to enter a hypo warning, press the Test button to

turn the meter off.

The beep tone for the alarm clock function sounds for 20 seconds. To

stop the beep tone press any button (Test, M or S).

Your test reminder time settings remain saved, even if you turn the

alarm clock function off altogether (

OFF).

24-hour-

format

12-hour-

format

You can turn off individual times for the alarm clock function by setting

the time to 0:00 (24-hour format) or 12:00 a.m. (12-hour format). Any

other time means that the alarm clock function is turned on for this

time.

To set the alarm clock function for midnight you must therefore set the

time to one minute to midnight (23:59 or 11:59 p.m.) or to one minute

after midnight (0:01 or 12:01 a.m.).

3.7 Setting the hypo warning

To help you to recognize an impending hypo, you can set a warning

threshold. There are three threshold options. If your blood glucose result

is below the threshold you have chosen, the warning hypo? appears in

the display together with the result. If the beep tone is turned on (On 1),

the meter also beeps.

You cannot set the hypo warning if you have turned Acoustic

Mode on (On 2). This is to prevent it from being confused with

other beep tones. If you have already set a threshold, the hypo

warning is automatically turned off if you subsequently turn

Acoustic Mode on.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 81 82

Sem comentários

Accu-Chek Softclix Manual do Utilizador Página 29